Check port versions - NRPE pkg version check: Difference between revisions
No edit summary |
No edit summary |
||
| Line 25: | Line 25: | ||
== Updating ports == | == Updating ports == | ||
I | I update ports daily from <code>/etc/crontab</code> with the following <code>portsnap</code> commands: | ||
<pre> | <pre> | ||
0 | #update ports | ||
0 12 * * * root /usr/sbin/portsnap cron && /usr/sbin/portsnap -I update | |||
</pre> | </pre> | ||
'''Note:''' The above <code>/etc/crontab</code> line will download the latest snapsnot and update the ports index files. The ports themselves will not be extracted. As explained in the portsnap manpage, it is a bad idea to automatically update /etc/ports - bad things will happen if you accidently update while installing something. This means that you should run <code>portsnap update</code> before installing/upgrading any ports. | |||
< | |||
/ | |||
</ | |||
Revision as of 23:26, 9 March 2010
A nagios plugin I wrote, which checks the number of outdated ports on a system. If the number exceeds the configured limits, WARNING or CRITICAL is returned. The plugin runs pkg_info -o and thus only needs the ports INDEX-x file to be up to date.
Download the plugin
The plugin can be downloaded to the correct place (and made executable) with the following commands:
sudo fetch -o /usr/local/libexec/nagios/check_port_versions http://www.gibfest.dk/check_port_versions sudo chmod +x /usr/local/libexec/nagios/check_port_versions
Feel free to check the source code to see what it does, it is very simple and well commented.
Configuring NRPE
Add the following line to /usr/local/etc/nrpe.cfg:
command[check_port_versions]=/usr/local/libexec/nagios/check_port_versions
Remember to restart NRPE after changing the config:
sudo /usr/local/etc/rc.d/nrpe2 restart
Updating ports
I update ports daily from /etc/crontab with the following portsnap commands:
#update ports 0 12 * * * root /usr/sbin/portsnap cron && /usr/sbin/portsnap -I update
Note: The above /etc/crontab line will download the latest snapsnot and update the ports index files. The ports themselves will not be extracted. As explained in the portsnap manpage, it is a bad idea to automatically update /etc/ports - bad things will happen if you accidently update while installing something. This means that you should run portsnap update before installing/upgrading any ports.
