Ezjail host

Basic install with mfsbsd

After receiving the server from Hetzner I boot it using the rescue system which puts me at an mfsbsd prompt. I then edit the zfsinstall script /root/bin/zfsinstall and add "usr" to FS_LIST near the top of the script. I do this because I like to have /usr as a seperate ZFS dataset.

I then run the zfsinstall script like below. I am only using 30G so I can get a basic jail host system up and running. The actual jails and data will be on another ZFS pool which will be built on top of an encrypted GELI device.

Note that the disks are new-ish (Power_On_Hours is 73 on both drives according to smartctl, which the mfsbsd author has been clever enough to include on mfsbsd) but I still found an MBR partition that needed to be deleted first. This can be done with the destroygeom command like shown below:

[root@rescue ~]# zfsinstall -d ad4 -d ad6 -r mirror -s 5G -t /nfs/mfsbsd/9.0-amd64-zfs.tar.xz -z 30G 
Error: /dev/ad4 already contains a partition table.

=>        63  5860533105  ad4  MBR  (2.7T)
          63  5860533105       - free -  (2.7T)

You may erase the partition table manually with the destroygeom command
[root@rescue ~]# destroygeom
Usage: /root/bin/destroygeom [-h] -d geom [-d geom ...] [-p zpool ...]
[root@rescue ~]# destroygeom -d ad4 -d ad6
Destroying geom ad4:
Destroying geom ad6:
[root@rescue ~]# zfsinstall -d ad4 -d ad6 -r mirror -s 5G -t /nfs/mfsbsd/9.0-amd64-zfs.tar.xz -z 30G 
Creating GUID partitions on ad4 ... done
Configuring ZFS bootcode on ad4 ... done
=>        34  5860533101  ad4  GPT  (2.7T)
          34        2014       - free -  (1.0M)
        2048         128    1  freebsd-boot  (64K)
        2176    10485760    2  freebsd-swap  (5.0G)
    10487936    62914560    3  freebsd-zfs  (30G)
    73402496  5787130639       - free -  (2.7T)

Creating GUID partitions on ad6 ... done
Configuring ZFS bootcode on ad6 ... done
=>        34  5860533101  ad6  GPT  (2.7T)
          34        2014       - free -  (1.0M)
        2048         128    1  freebsd-boot  (64K)
        2176    10485760    2  freebsd-swap  (5.0G)
    10487936    62914560    3  freebsd-zfs  (30G)
    73402496  5787130639       - free -  (2.7T)

Creating ZFS pool tank on ad4p3 ad6p3 ... done
Creating tank root partition: ... done
Creating tank partitions: var tmp usr ... done
Setting bootfs for tank to tank/root ... done
NAME            USED  AVAIL  REFER  MOUNTPOINT
tank            208K  29.3G    21K  none
tank/root        88K  29.3G    25K  /mnt
tank/root/tmp    21K  29.3G    21K  /mnt/tmp
tank/root/usr    21K  29.3G    21K  /mnt/usr
tank/root/var    21K  29.3G    21K  /mnt/var
Extracting FreeBSD distribution ...
 done
Writing /boot/loader.conf... done
Writing /etc/fstab...Writing /etc/rc.conf... done
Copying /boot/zfs/zpool.cache ... done

Installation complete.
The system will boot from ZFS with clean install on next reboot

You may type "chroot /mnt" and make any adjustments you need.
For example, change the root password or edit/create /etc/rc.conf for
for system services. 

WARNING - Don't export ZFS pool "tank"!
[root@rescue ~]#

Encrypted zvol

[tykling@latency ~]$ zfs list
NAME               USED  AVAIL  REFER  MOUNTPOINT
zfstank           1.41G  72.9G    21K  none
zfstank/root      1.41G  72.9G  1.32G  /
zfstank/root/tmp    35K  72.9G    35K  /tmp
zfstank/root/var  94.4M  72.9G  94.4M  /var

[tykling@latency ~]$ sudo zfs create -V 65G zfstank/encrypted

[tykling@latency ~]$ zfs list
NAME                USED  AVAIL  REFER  MOUNTPOINT
zfstank            66.4G  7.89G    21K  none
zfstank/encrypted    65G  72.9G    16K  -
zfstank/root       1.43G  7.89G  1.34G  /
zfstank/root/tmp     35K  7.89G    35K  /tmp
zfstank/root/var   95.2M  7.89G  95.2M  /var

[tykling@latency ~]$ ls -l /dev/zvol/zfstank/encrypted
crw-r-----  1 root  operator    0,  81 Dec  8 19:42 /dev/zvol/zfstank/encrypted

[tykling@latency ~]$ sudo geli init -s 4096 -K /root/encrypted.key /dev/zvol/zfstank/encrypted
Enter new passphrase:
Reenter new passphrase:

[tykling@latency ~]$ sudo geli attach -k /root/encrypted.key /dev/zvol/zfstank/encrypted
Enter passphrase:

[tykling@latency ~]$ sudo zpool create cryptopool /dev/zvol/zfstank/encrypted.eli

[tykling@latency ~]$ sudo zpool list
NAME         SIZE   USED  AVAIL    CAP  HEALTH  ALTROOT
cryptopool  64.5G   572K  64.5G     0%  ONLINE  -
zfstank     75.5G  1.73G  73.8G     2%  ONLINE  -

[tykling@latency ~]$ zpool status cryptopool
  pool: cryptopool
 state: ONLINE
 scrub: none requested
config:

        NAME                          STATE     READ WRITE CKSUM
        cryptopool                    ONLINE       0     0     0
          zvol/zfstank/encrypted.eli  ONLINE       0     0     0

errors: No known data errors
[tykling@latency ~]$ 

[tykling@latency ~]$ zfs list
NAME                USED  AVAIL  REFER  MOUNTPOINT
cryptopool          352K  63.5G   112K  /cryptopool
zfstank            66.9G  7.45G    21K  none
zfstank/encrypted    65G  72.5G    32K  -
zfstank/root       1.87G  7.45G  1.78G  /
zfstank/root/tmp     35K  7.45G    35K  /tmp
zfstank/root/var   95.3M  7.45G  95.3M  /var

[tykling@latency ~]$ sudo zfs set mountpoint=none cryptopool

[tykling@latency ~]$ sudo zfs create -o compression=gzip -o mountpoint=/usr/jails cryptopool/jails

[tykling@latency ~]$ zfs list
NAME                USED  AVAIL  REFER  MOUNTPOINT
cryptopool          536K  63.5G   112K  none
cryptopool/jails    112K  63.5G   112K  /usr/jails
zfstank            66.9G  7.44G    21K  none
zfstank/encrypted    65G  72.4G  2.17M  -
zfstank/root       1.88G  7.44G  1.79G  /
zfstank/root/tmp     35K  7.44G    35K  /tmp
zfstank/root/var   95.3M  7.44G  95.3M  /var
[tykling@latency ~]$